| Corporate Announcement |
| State-of-the-Art HDPE pipe production and HDPE fittings fabrication plant |
Independent
Pipe Products, Inc.'s (IPPI) state-of-the-art, 275,000 square
foot facility on 26 acres incorporates a ten extrusion line HDPE
pipe production plant with IPPI's expanded
HDPE fittings fabrication plant.
|
| |
| New Products |
We're Ready To Make Our Mark  |
| Independent Pipe Products, Inc. is pround to annouce the arrival of
Factory Mutual Approved Design-Flow® HDPE Pipe.
Also earning the respected Mark of "FM Approved" are IPPI's HDPE Flange
Adapters &our Design-Flow® Bolt Rings.
Our IPS FM listing for PE flanges and DI or SS bolt rings will cover 2"
through 36", moving IPPI into the top spot when it comes to large diameter
FM Approved HDPE Pipe Fittings.
Download FM Approved Design-Flow® Products Information
|
| |
| IPPI Leads Rapid Evolution Into
PE4710 Pipe Era. |
| PE4710 is the latest advancement in
North American High Density Polyethylene
Bi-Modal Polymer Technology.
A PE4710 HDPE piping system can result in
a 15% savings when compared to current costs
of PE3408 piping systems. By virtue of its
higher pressure rating enabling the use
of the next lower DR, wall thickness becomes
25% less, ID increases and the weight per
foot of pipe is reduced. All of these characteristics
are needed advantages especially when competing
against other piping materials in the marketplace.
Independent Pipe Products, Inc. is producing
PE4710 pipe per customer order. Certain
sizes are already available from inventory.
Internally, IPPI has been fabricating its
fittings from PE4710 since late 2006. Due
to our massive inventory, it takes some
time to complete the transition to all PE4710
fittings. IPPI is prepared to support your
pipe and fittings sales with readily available
PE4710 inventory for quick delivery to your
PE4710 projects.
Call NOW to order PE4710 pipe and fittings
with its money saving 25% thinner wall at
the same pressure rating as PE3408.
Dial: 800-499-6927 and ask for Customer
Service
Download Design-Flow® Dual Marking Designations
Design-Flow® HDPE Pipe - Print Line Data Sheet - M&I, D2513, Gray SL, FM & Striping
|
| |
| Design-Flow™ Bolt Rings |
Our Design-Flow Bolt Ring is so unique
in its novel design that it has earned “Patent
Pending” status based, in principle, on
its strong, tough, ductile and constant
sealing design. Its contoured cross-section
enables ring deformation which provides
a constant sealing force. Available in IPS
Ductile Iron sizes 3/4" - 54",
DIPS Ductile Iron sizes 4" - 30",
IPS Stainless Steel sizes 2" - 54",
DIPS Satinless Steel sizes 4" - 30",
IPS Epoxy Coated sizes 3/4" - 54"
and DIPS Epoxy Coated 4" - 30".
Download
Design-Flow® Bolt Ring information |
| |
| Design-Flow™ HDPE Pipe |
Inedependent Pipe Products, Inc. announces
its new product Design-Flow™ HDPE
Pipe. IPPI Design-Flow HDPE Pipe will be
available in IPS sizes 2" through 24"
and DIPS sizes 4" through 24"
for the industrial, water and wastewater
markets.
Download
Design-Flow® HDPE Pipe information
Download
Design-FLow® PE Pipe chart
|
| |
| Bell MJ Adapter Kit & Accessories |
This kit enables HDPE pipe to be fitted
with a bell end in order to accept ductile
iron pipe or DIPS OD PVC pipe (also can
accept IPS OD PVC pipe by using a transition
gasket). This eliminates the need for a
ductile iron solid sleeve when making this
connection. This kit includes the HDPE Bell
MJ fitting with stainless steel reinforcing
collar, ductile iron C110 heavy body gland
ring, gasket and extra length T-bolts. Retaining
glands are available for Ductile Iron Pipe
or PVC Pipe and are sold seperately. Transition
gaskets are also available and sold seperately.
Bell MJ Adapters are fully pressure rated
for DR ordered and are AWWA compliant at
no extra charge.
Download
Bell MJ Adapter Kit information
Download
Bell MJ Adapter Accessories information
|
| |
| Fuse-A-Corp® |
(To Tap the Water-Main and connect the
Service Tubing)
This Corporation-Stop valve has a successful
25 year history of leak free performance
in water distribution service. This ball-valve
unit eliminates the corrodable metal tapping-saddle
on HDPE pipe. It becomes part of the water
main itself via heat-fusion. The Fuse-A-Corp
is saddle fused to the 2"* or larger
HDPE water main using standard fusion procedures,
providing a proven leak-free joint.
Download
Fuse-A-Corp information |
| |
You must have the Adobe Acrobat Reader to
view PDF files. Downlaod the plugin now.
|