| Machined Fittings |
| Machined fittings (i.e.: flange adapters,
stub ends, machined reducers, mj adapters,
slip joint anchors, end caps, branch saddles)
are normally fully pressure rated to SDR ordered
unless otherwise specified. |
| Machined fittings are normally stocked in
most SDR’s listed and can be remachined
to a lesser wall thickness if needed. |
| Some fittings may require additional machining
charges, please inquire for pricing information
if remachining is necessary. |
| |
| Fabricated Fittings |
| Fabricated mitered fittings (ie: elbows,
line tees, line crosses and wyes) are generally
rated at 80% of the pressure rating of the
SDR of material that is used for the fitting
(ie: a mitered fitting produced using SDR-11
160 psi material would be pressure rated for
a working pressure of 128 psi). |
| Fully pressure rated mitered fabricated
fittings will be constructed using the next
size heavier SDR material available (ie: fittings
rated for a SDR-11 160 psi working pressure
rating would be manufactured using SDR-9 material). |
| Other fabricated fittings such as branch
saddle tees, branch saddle wyes, fabricated
concentric reducers and waterstops are normally
pressure rated to the SDR ordered. |
| Fabricated fittings are stocked in most
SDR’s listed. |
| Remachining ends of a fabricated fitting
to a lesser SDR may require additional machining
charges. Please inquire for pricing information
if remachining of ends is necessary. |
| |
| Molded Fittings |
| Molded fittings are stocked in most SDR’s
listed and are normally fully pressure rated. |
| Remachining ends of molded fittings will
require an additional charge. Please inquire
for Quick Quote if remachining of ends is
necessary. |
| |
| Resale Items |
| Resale items (i.e.: back up rings, drive-in
stiffeners, gland packs, transition fittings)
are normally stocked only in most frequently
used sizes and pressure ratings. More information
regarding resale items may be obtained through
our Customer Service Department. |
